news center

Aoxing heavy industry specializes in producing carbon powder forming machine

Author (Admin) Views ( ) Posted at (2023/09/13)

 

        Zhengzhou Aoxing Heavy Industry Machinery Co., Ltd. specializes in the research of carbon powder molding machine, the main products are: carbon powder molding machine, water smoke carbon tablet press, barbecue carbon molding machine, hydraulic press, automatic production line of water smoke carbon, rotary tablet press, soot carbon molding machine, activated carbon production equipment, shredder, carbon powder tablet press and other molding machine machinery and equipment. The automatic hydraulic production line has the advantages of stable, reliable, convenient operation, simple operation, long service life, and the products meet the export requirements, and overcomes all the shortcomings of the screw forming machine. The surface of the product is smooth, free of adhesion and zero loss. It can also be used in chemical industry and various special industries. Users who buy machines in the company can learn technology and practice operation for free.
        The maintenance method of tablet press is paid attention to. Nowadays, many enterprises lack of care. The staff are busy with production and neglect the maintenance of the machine. So the common machine because of a little bit of small problems and problems, resulting in the service life of the machine, we should pay attention to the maintenance and daily care of the tablet press. The thickness and fineness of particles are uneven (the weight difference of finger exceeds the specified limit) 1 particles are uneven, and the velocity of particles is different when pressing, which leads to uneven thickness and fineness of particles filled into the middle mold hole. If the coarse particles are large, the pieces are light and the fine particles are more, the weight of the particles is more. Solution: the particles should be mixed or sifted to the fine powder. 2 if there is fine powder sticking punch, the difference of sheet weight can be large when the punch is suspended. At this time, the down punching rotation is not flexible, and the punch shall be checked in time, the punch shall be removed and the holes of the blanking and middle die shall be cleaned. 3. The fluidity of particles is not good, and the amount of particles flowing into the middle mold hole is often less, which causes the excessive difference of sheet weight and over limit. Solution: the particle should be re - granulating or adding suitable flow aids such as micro silica gel to improve the fluidity of particles. 4. Particle stratification. The particle stratification is solved and the particle size is reduced. 5 the smaller tablets are made of larger particles. Solution: select the appropriate size of particles. The hopper is blocked, which often occurs in the drugs with strong viscosity or humidity. The hopper should be dredged, the tablet environment should be kept dry, and the flow aid should be added properly to solve the problem. 7 the storage quantity of materials in the material is different, which is controlled within 50%. 8 the feeder is unbalanced or not installed in place, resulting in uneven packing. 9 the scraping plate is uneven or is not installed properly. Solution: leveling. If there is forced feeder, the speed of the driven feeder wheel does not match the rotating speed of the turntable. Solution: consistent. 11 the consistency between punch and middle die hole is not good, for example, there are many powder leakage between the outer circumference of the blanking and the wall of the mold hole, which causes the "astringency" phenomenon of the blanking, which causes insufficient filling of materials. Therefore, the punch and the middle die should be replaced. The length of the lower flush is different and the excess is poor, which causes the uneven filling amount. Solution: poor repair, poor ± five μ Within M. 13 if the lower impact is damped, the damping force adjusted by the damping screw is not good. Readjust. 14. The filling track is worn or the filling mechanism is unstable. Solution: replace or stabilize. 15. Pursue production, the rotary table speed is too fast and the filling quantity is insufficient. Especially when pressing large area, the rotation speed should be reduced properly to ensure sufficient filling. 16 the tablet press vibrates too much, the structure is loose, the assembly is unreasonable or reassembled; The pressure of the press is too high to reduce the pressure.
        Zhengzhou Aoxing Heavy Industry Machinery Co., Ltd. welcome new and old friends from all walks of life to visit our factory and discuss business
www.cnhookahcharcoal.com
Whatsapp:+0086 13849118395
e-mail：1430396450@qq.com

Pre : Production equipment of new type hookah carbon tablet press
Next : Expert in production of soot carbon molding machine