news center

Carbon powder molding machine working principle and structural characteristics, etc

Author (Admin) Views ( ) Posted at (2023/08/07)

 

         Toner molding machines are machines that make powdered toner into different shapes. Its working principle is: by the electronic control system operation molding machine, the hydraulic equipment pushes the raw material to extruded, and produces the ideal high carbon. Zhengzhou Aoxing Heavy Machinery Manufacturing Co., LTD. Is a professional manufacturer of developing toner forming machines. Main products: Arabian shisha carbon machine, silver bar carbon machine, shisha carbon production line, carbon machine, carbon powder molding machine, carbon molding machine and coal bar molding machine, molding machine machinery and equipment. Hydraulic automatic production line, stable work, reliable, convenient, simple operation, long service life, products meet export requirements. The surface of the product is smooth and clean, without adhesion or wear. It can also be used in chemical industry and various special industries. This process has obvious advantages and overcomes the disadvantages such as large investment, high cost and easy damage of key parts of screw forming machine. In addition, the quality of production process carbon products is stable and there are many kinds of products. At present, in addition to ordinary synthetic barbecue, heating carbon, there are also combustion carbon and industrial carbon. Improve product quality and yield; Is the development trend of the future. It is the ideal equipment for toner forming machine. Upgrade users in my company can learn technology for free, practice operation.
 
         A. Energy-saving toner forming machine structure
 
 1. Fast feed, fast feed, small lead, saving power.
  
2, shaft and cylinder connection is rigid, high concentricity, anti-push, the whole machine is stable.
 
3. Stable operation, low noise, and overload protection.
 
4. Adopt bolt head and cylinder structure to connect.
 
        Installation and debugging of multi-purpose toner forming machine
 
1. Parts shall be cleaned and derusted before installation so that they can be transported or stored for a long time, and nondestructive testing shall be conducted on the inner parts of the ring.
 
2. Install and debug the machine correctly according to the manual. After debugging, the machine runs stably.
 
        Lubricate the lubricating parts before the test, and the amount of oil is moderate. Check for looseness and tighten all the bolts. Observe for any foreign body or abnormal sound while ordering the machine. All confirmed before the operation. And check that the rotation direction is correct. After the machine is idle for 3 ~ 5 minutes, everything can be normal feeding test, the new machine feeding should be uniform, moderate wet and dry.
 
        Three, the use and maintenance of high carbon powder molding machine
 
1. Before starting the machine, check whether the rotating part is flexible and whether there is abnormal noise. The continuous production can be carried out after 2 to 3 minutes without turning.
 
2. Raw materials should be processed, added with water and glue, and used after mixing evenly.
 
3. Lubricating oil is injected into the machine regularly.
  
        Before discharging, the shutdown time will be squeezed out of the shutdown time by the material in the cylinder, then the head will be removed, cleaned and remounted, and used for operation again.
 
        Zhengzhou Aoxing heavy Machinery Manufacturing Co., LTD. Welcome new and old friends from all walks of life to visit our factory and negotiate business.
Whatsapp:+0086 13849118395
e-mail：1430396450@qq.com
, web site: www.cnhookahcharcoal.com

 

Pre : Hookah charcoal machine production of hookah charcoal burning characteristics
Next : Production of hookah shisha charcoal machine how carbon density detection