news center

2021 new energy-saving rotary tablet press

Author (Admin) Views ( ) Posted at (2023/07/19)

            Rotary tablet press is the production of various shapes of powder raw materials equipment.

        One, the working principle is: the use of electronic control system to operate the forming machine, hydraulic equipment to promote material extrusion, high pressure will produce the required square, round, and other products.
 
       Second, energy-saving charcoal machine structure characteristics.
 
       1, feed, feed fast, promote small guide, save electricity.
 
       2. The shaft seat is connected with the cylinder with steel, high concentricity, thrust resistance, and the whole machine is stable.
 
       3. Smooth operation, low noise and overload protection.
 
       Three, use the machine to install and debug toner forming machine
 
       1. Clean the parts before installation, remove the substances that have been rusting for a long time in transportation or storage, and check whether the parts have ring damage.
 
       2. Install the machine correctly according to the instructions, and load the machine firmly into the test machine after debugging.
 
        Lubrication is needed before commissioning, and the lubricating oil is appropriate. Check all bolts for looseness and tightening. Push the machine gently and observe for foreign bodies or unusual sounds. All confirmations before operation. And check that the rotation direction is correct. Dry operation of the machine for 3 ~ 5 minutes, everything can be normal trial production feeding, new machine feeding should be uniform, moderate moisture.
 
       Zhengzhou Aoxing Heavy Machinery Co., LTD. Specializes in the research of high quality molding machines. Main products: toner forming machine, shisha carbon pressing machine, barbecue carbon forming machine, hydraulic type pressing machine, shisha carbon automatic production line, rotary type pressing machine, Shisha carbon forming machine, activated carbon production equipment, shredder, toner pressing machine and other mechanical equipment forming machine. Automatic hydraulic pipe, stable, reliable, easy to operate, simple, long service life, products meet export requirements. Product surface smooth, no adhesion, zero loss. It can also be used in chemical industry and various special industries. This process has obvious advantages in producing mould-cast carbon, which completely overcomes the disadvantages of large investment, high cost and easy damage of key parts of screw forming machine. However, the quality of carbon products produced by this process is stable, with a wide range of products. Now, in addition to ordinary baked synthetic carbon and heated carbon, there are also induced charcoal and industrial carbon. The product quality is good, the output increases unceasingly; Future development trend. The moulding machine is the ideal enrichment machine. Users who buy technology from our company can learn and practice for free.
Whatsapp:+0086 13849118395
e-mail：1430396450@qq.com
, URL:www.cnhookahcharcoal.com

Pre : Production process of toner forming machine
Next : Development prospect of shisha charcoal and molding charcoal