news center

Automatic toner molding machine produces environmentally friendly regenerated charcoal

Author (Admin) Views ( ) Posted at (2023/07/17)

        At present, the production of charcoal in the market, is not a carbonization after a molding, nor a carbonization after molding, using the "low oxygen smold" carbonization process, not only the carbonization temperature is not high enough (usually at 500℃ or so), and ash content is large (some have enough oxygen, burning excessive). Therefore, carbon powder automatic molding machine production of environmental charcoal, good carbonization method should be: high temperature carbonization complete heating anoxic solution carbonization. This is the method of coking in modern industry. In fact, the carbonization of wood chips and coke can be considered to be the same or similar in principle and technical requirements.

        It is understood that the proportion of sawdust charcoal is about 35%. Therefore, the use of advanced carbonization technology, every three tons of pure dry wood chips (moisture content less than 10%) can produce a ton of charcoal. In the current market, the relatively expensive price of pure dry sawdust is about 450 yuan/ton, and the cost of carbon raw material per ton is only 1350 yuan (of course, this is the ideal value, carbonization technology is poor, also cannot reach this level). Zhengzhou Aoxing Heavy Machinery Co., LTD. Specializes in the development of high quality automatic molding machine. We can directly use toner to produce environmentally friendly carbon. Main products: toner forming machine, shisha carbon pressing machine, barbecue carbon forming machine, hydraulic type pressing machine, shisha carbon automatic production line, rotary type pressing machine, Shisha carbon forming machine, activated carbon production equipment, shredder, toner pressing machine and other mechanical equipment forming machine. Automatic hydraulic pipe, stable, reliable, easy to operate, simple, long service life, products meet export requirements. Product surface smooth, no adhesion, zero loss. It can also be used in chemical industry and various special industries. This process has obvious advantages in producing mould-cast carbon, which completely overcomes the disadvantages of large investment, high cost and easy damage of key parts of screw forming machine. However, the quality of carbon products produced by this process is stable, with a wide range of products. Now, in addition to ordinary baked synthetic carbon and heated carbon, there are also induced charcoal and industrial carbon. The product quality is good, the output increases unceasingly; Future development trend. Molding machines are ideal production equipment. Users who buy technology from our company can learn and practice for free.
Whatsapp:+0086 13849118395
e-mail：1430396450@qq.com
, URL:www.cnhookahcharcoal.com

Pre : The production scope of automatic molding machine for carbon briquetting
Next : Automatic charcoal molding machine production of environmental charcoal simple operation