news center

The application and production technology of shisha carbon moulding machine

Author (Admin) Views ( ) Posted at (2023/07/06)

        Zhengzhou Aoxing Heavy Machinery Co., LTD. Specializes in the research of high quality charcoal molding machine. Main products: toner forming machine, shisha carbon pressing machine, barbecue carbon forming machine, hydraulic type pressing machine, shisha carbon automatic production line, rotary type pressing machine, Shisha carbon forming machine, activated carbon production equipment, shredder, toner pressing machine and other mechanical equipment forming machine. Automatic hydraulic line, stable, reliable, easy to operate, simple, long life, the product meets the export requirements, overcome all the shortcomings of the screw forming machine. Smooth surface, no adhesion, zero loss. It can also be used in chemical industry and various special industries. The advantages of molding carbon production are obtained by this process, and the disadvantages of screw forming machine such as large investment, high cost and easy damage of key components are completely overcome. The quality of the carbon products produced by this process is stable, with a wide range of products. Now, in addition to the ordinary baked synthetic carbon and heated carbon, there are also known as combustion carbon and industrial carbon. The product quality is good, the output increases unceasingly; Future trends. The toner molding machine is an ideal enrichment machine. Users in our company can buy free learning technology, practice operation.

Toner molding machine is the production of various shapes of powder material equipment. How it works: an electronic control system operates the molding machine, hydraulic equipment drives the raw material extrusion, high pressure will produce the required carbon rod.
       One, energy-saving charcoal molding machine structure characteristics
      1, feed more, feed fast, promote small lead, save electricity.
      2. The shaft seat is connected with the cylinder with steel, high concentricity, thrust resistance, and the whole machine is stable.
     3. Stable operation, low noise and overload protection.
     4, use the machine to install and debug the charcoal molding machine
     5. Before installation, it is necessary to clean the parts, remove items with long rust during transportation or storage, and check whether the parts have nondestructive rings.
       2. Install the machine correctly according to the instructions, and connect the machine firmly to the test machine until debugging is completed.
        Lubricate each testing machine before lubrication, lubricating oil amount. Check all bolts for looseness and tightening. Push the machine gently and observe for foreign bodies or unusual sounds. All confirmations before operation. And check that the rotation direction is correct. After the machine is idle for 3-5 minutes, the trial production and feeding can be carried out when everything is normal. The feeding of the new machine should be uniform and moderately humid.
      Three, the use and maintenance of the high - voltage toner unit
       1. Before starting the machine, check whether the rotating parts are flexible and whether there is abnormal noise. The fan can operate for 2-3 minutes before feeding and production.
      2, the material needs to be treated, add water, add adhesive, stir before use.
      3. Oil the machine regularly.
      4. Stop the machine before cutting, empty the cylinder after extruding, remove the nose seat, and reinstall it after cleaning, ready to work again.
       Zhengzhou Aoxing Heavy Machinery Co., LTD. Welcome old and new friends to visit and negotiate business
       
Whatsapp:+0086 13849118395
e-mail：1430396450@qq.com

        Website:www.cnhookahcharcoal.com

 

Pre : Advantages hookah charcoal molding machine
Next : The production of shisha carbon equipment is shisha carbon forming machine