news center

Toner molding machine working principle and structural characteristics , etc.

Author (Admin) Views ( ) Posted at (2023/11/21)

    

       Carbon powder molding machine is made of different shapes of charcoal powder. Its working principle is: the electronic control system operates the molding machine, uses the hydraulic equipment to push the material extrusion, so as to produce the required high-pressure carbon rod. Zhengzhou Aoxing Heavy Industry Machinery Co., Ltd. specializes in high quality charcoal molding machine.
       Main products: carbon powder molding machine, hookah carbon tablet press, barbecue carbon molding machine, hydraulic tablet press, hookah carbon automatic production line, rotary tablet press, hookah carbon molding machine, activated carbon production equipment, shredder, carbon powder tablet press and other molding machine machinery and equipment. Automatic hydraulic pipeline, stable, reliable, easy to operate, simple, long service life, products meet export requirements. Product surface is smooth, no adhesion, zero loss. It can also be used in chemical industry and various special industries. Using this process to produce formed carbon has obvious advantages, which completely overcomes the disadvantages of spiral molding machine, such as large investment, high cost, easy damage of key parts, etc.; moreover, the quality of carbon products produced by this process is stable, and there are many kinds of products. At present, in addition to ordinary synthetic carbon grid, heating wood charcoal, some people think that burning industrial wood charcoal; product quality and output are constantly improved; it is the future The development trend of the industry. Toner molding machine is the ideal equipment to get rich. Users in the company to buy free learning technology, training operation.
 
1¡¢ Structural characteristics of energy saving charcoal forming machine
 
1. Feed more, feed fast forward drive small, labor-saving.
 
2. The shaft seat and cylinder are connected by steel, with high concentricity, thrust resistance and good stability.
 
3. Stable operation, low noise and overload.
 
4. It is a bolt connected structure with the cylinder head.
 
2¡¢ Is the use of machinery for charcoal machine installation and commissioning
 
1. During the installation, the parts shall be cleaned, the rusty materials which have been transported or stored for a long time shall be removed, and the parts shall be subject to non-destructive testing.
 
2. Install it correctly according to the instruction, and put the machine firmly on the testing machine after debugging.
 
Before each test, the machine should be lubricated with proper amount of oil. Check all bolts for looseness and tightening. Jog the machine to observe whether there is abnormal noise or abnormal noise. Everything is confirmed before operation. Check the correct direction of rotation. When the machine idles for 3 to 5 minutes, all normal feeding can be used for trial production, and the feeding of new machine should be uniform and moderate dry and wet.
 
3¡¢ Is the use of high-pressure molding machine toner and maintenance
 
Before the start of the shift, check whether the rotating parts are flexible, whether there is abnormal noise, and the empty machine runs for 2-3 minutes to feed the production.
 
2. The raw material is treated, water is added, binder is added and used after mixing.
 
3. The machine is filled with lubricating oil regularly.
 
Stop cutting before cutting, stop when the extrusion barrel is empty, dismantle the head, clean and re install, and then prepare for work.
 
Zhengzhou Aoxing Heavy Industry Machinery Co., Ltd. welcomes new and old friends from all walks of life to visit our factory and negotiate business.
Whatsapp:+0086 13849118395
e-mail£º1430396450@qq.com

, Website :www.cnhookahcharcoal.com

Pre : Hookah charcoal hookah charcoal machine production combustion characteristics
Next : Carbon powder molding machine with four production advantage